Go BottomJohn Deere 4300 Loses Power
 | Derek_90
Join Date: Mar 2024 Posts: 2 Cuba ny 
|
2024-03-05 201800
I have a 4x4 hydrostatic John Deere 4300 and when I am going up hill or even on the road it loses power and slows down to a crawl and then I have to let off the pedal and push the pedal down again and it will go full power for a little ways and do it all over again, what would cause this? I have checked the hydraulic fluid level multiple times and changed the filter and it did not make a difference.
Reply to |
Quote Reply |
Add PhotoJohn Deere 4300 Loses Power
| wonderline
Join Date: May 2021 Posts: 2
|
2024-03-05 201801
Even though you mentioned changing the filter, there could still be issues related to clogging or improper installation. Double-check to ensure the filter is clean and properly seated. ....
Reply to |
Quote Reply |
Add PhotoJohn Deere 4300 Loses Power
| Dorman
Join Date: Nov 2021 Posts: 5 Hillsville
|
2024-03-05 201802
If the hydraulic pump is not providing adequate pressure, it could result in loss of power, especially when under load. Contaminated hydraulic fluid can cause various issues, including loss of power. Make sure the hydraulic fluid is clean and free from any contaminants. If necessary, flush the hydraulic system and refill it with clean fluid. ....
Reply to |
Quote Reply |
Add PhotoJohn Deere 4300 Loses Power
| Derek_90
Join Date: Mar 2024 Posts: 2 Cuba ny
|
2024-03-05 201803
Ok thank you I appreciate it, should I flush it with new hydraulic fluid or something else? Just curious as to whether or not there's a cheaper solution to flush it with? Considering the price of hydraulic fluid. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This